11
Optional Accessories (continued)
B. LEDS Lighting system
Part List
:
Main housing
LED Warm / Cool
Spacers
WARNING
: Turn off all electrical
power prior to making any
electrical connections. Failure
to do so will damage the led
and could result in electrical
shock, personal injury or death
a. Turn off all electrical power to the fan while making any electrical connections
b. Once the disc array has been installed, leveled, and you h-are happy with the operation,
remove the black cover located dirctly below the fan shown figure B
Figure B.
Please take the time to make sure the fan rotates freely
with the main LED housing
c. Mount the Main LED housing to the black lower housing of
the motor using the 2 screws retained from the last step, shown
figure C.
Note: You may need to use one or more of the included
spacers between the black lower housing and the main LED
housing to achieve clearance between the fan and the LED
lighting system to ensure smooth operation without rubbing.
Spacers
Retain the 2 mounting screws removed from the lower
housing, the will be used later
d. Make the appropriate electrical connection from the LED housing
to the motor.
Note the connectors used from the motor to the LED
Housing are Male/Female and can only be installed one way!
e. Take care to tuck the wires into the lower housing using the main
housings cutaway as a channel to run the wires.
f. You can now line up the tangs of the main housing and gently rotate clockwise to lock them in
place.
Figure C.
