EXFO T200S, User Manual, Page: 116 / 146

SCPI Command Reference
110
T200S
T200S Specific Commands
[SOURce]:SWEep:CYCLe:COUNt?
Description
This query indicates either the number of sweep cycles set or the
minimum/maximum/default number of sweep cycles.
At *RST, this value is set to 1.
Syntax [:SOURce]:SWEep:CYCLe:COUNt?<wsp>
[MAXimum|MINimum|DEFault]
Parameter(s)
³
MAXimum
The query returns the maximum possible number of sweep
cycles.
³
MINimum
The query returns the minimum possible number of sweep
cycles.
³
DEFault
The query returns the default number of sweep cycles.
Response Syntax
<count>
Response(s)
count:
Integer corresponding to the current number of sweep cycles or
the minimum/maximum/default possible number of sweep
cycles, depending on the specified query parameters.
Example(s)
SOUR:SWE:CYCL:COUN 4
SOUR:SWE:CYCL:COUN? returns 4
See Also
[SOURce]:SWEep:CYCLe:CONTinuous?
on page 108
[SOURce]:SWEep:CYCLe:COUNt on page 109