manualshive.com logo in svg

EXFO MAX-630G, User Manual

Share
Download
EXFO MAX-630G User Manual Download Page 97

Running DSL/IP Tests and Viewing Results

G.fast/VDSL2/ADSL2+ Multi-play Test Set

91

WAN Status

WAN Status

The 

WAN Status

 tab allows you to view the status information of the 

connection between the WAN port of the unit and the ISP (internet service 
provider). For 

Manual Test

, you can also select which triple-play test you 

want to run or view. 

WAN Access

 specifies the encapsulation method 

used by the network and consists of the following 
types:

PPPoE

 is point-to-point protocol over 

Ethernet.

PPPoA

 is point-to-point protocol over ATM.

DHCP

 is Dynamic Host Control Protocol 

which is used to dynamically assign an IP 
address for the client node on the network.

IPv6 (DHCP)

 is equivalent to the above but for 

Internet Protocol version 6 vs IPv4.

Static IP

 is the current location assigned by the service provider or 

user.

IPoA

 stands for classical Internet Protocol over ATM.

WAN Status

 value changes as per the WAN state of the current test. For 

Manual Test

, the following states may be displayed:

Idle

 - if WAN setup for the selected 

Test

 is different from the one 

running and 

Login

 button is not activated.

Disconnected

 - if WAN setup for the selected 

Test

 is different from 

the one running and this test had WAN connected before and 
stopped.

Connecting

 or 

Connected

 - if current selected test is running.

Assigned IP

 displays IPv4 address information assigned to the unit that 

is connected to the network.

Summary of Contents for MAX-630G

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands