manualshive.com logo in svg

EXFO MAX-630G, User Manual

Share
Download
EXFO MAX-630G User Manual Download Page 81

Setting Up DSL/IP Tests

G.fast/VDSL2/ADSL2+ Multi-play Test Set

75

Setup

Setup

The 

Setup

 function displays the following sub-menu:

Modem Settings

 allows you to set the display and 

power parameters of the modem.

Application Settings

 allows you to preset the unit 

with specific DSL measurement values.

VoIP Phone Book

 includes pages to setup and 

save phone numbers for the VoIP test.

Modem Settings

Modem Settings

 provide the means to configure the unit power scheme.

Display Modem

 displays the modem state in the 

title bar of the unit. Default value is 

Yes

.

Modem Power OFF

:

Immediately

 for when a DSL/IP test is 

completed or stopped. In this mode, the 
modem is powered on when DSL/IP test 
starts.

Idle

 values power off the modem within a 

defined period after an DSL/IP test is 
completed or stopped.

Summary of Contents for MAX-630G

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands