Setting Up DSL/IP Tests
G.fast/VDSL2/ADSL2+ Multi-play Test Set
63
Test Setup
Clone
Data WAN
(only available in
Manual Test
Setup
) allows you to add the WAN configuration
from the
Connection Setup
tab to this test, by
selecting
Yes
. If you select
No
, all the parameters
from the
Connection Setup
page, beginning with
Access Mode
, are listed and can be modified.
One additional
Access Mode
,
Bridged (DHCP)
can be configured here in the IPTV WAN setup, to
support the modem in bridge mode and WinCE in
DHCP. This allows WinCE to get the WAN IP
address via DSL connection through the modem's
bridge.
Bridged (DHCP)
uses same parameters
as
DHCP
mode.
To configure test setup values:
1.
Press the up/down arrow keys to select the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
5.
If you make any changes to the parameter values, you will be
prompted to save changes done in Profile. Press the on-screen function
keys to save or cancel your input.
