
Setting Up DSL/IP Tests
G.fast/VDSL2/ADSL2+ Multi-play Test Set
51
Test Configuration
The following parameters are available only when
Access Mode
is
IPoA
or
Static
.
IP Address
is the address for the unit that is actively connected to
your network or the internet at the time of login.
Gateway
is the IP address of the default gateway.
Verify Gateway
can be set to
Enable
or
Disable
.
Subnet Mask
is the network address used to identify if the IP
address is within the same wide area network.
DNS1
is the address of the primary domain name server to be used
by the unit. If DNS is unavailable, enter 0.0.0.0.
DNS2
is the address of the secondary domain name server to be
used by the unit. If DNS is unavailable, enter 0.0.0.0.
The following parameters are available only when the test setup is for
Ethernet
.
WAN
/
LAN Link Speed
is always set to
Auto
(GVXAA and GVXAB
models only).
WAN
/
LAN Link Speed
is a choice between
Auto
(negotiated
during the link establishment),
100
, or
10 Mbit/s
.
WAN
/
LAN Connect Mode
is
Full-
or
Half-Duplex
, when
Link
Speed
is set to
100
, or
10 Mbit/s
.
Note:
GVXAA and GVXAB models also support 1000 Mbit/s.
To configure the setup options:
1.
Press the up/down arrows to select the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.