EXFO FLS-2200, User Manual

Page: 11 / 185

Introducing the FLS-2200 Broadband Source
2
FLS-2200
Available Models
On the back panel, you will find the ports for remote control, the power
inlet and fuse holder.
The FLS-2200 Broadband Source supports local control (via its front panel)
and remote control (through GPIB or RS-232 using SCPI commands or the
provided LabVIEW drivers).
Available Models
The FLS-2200 Broadband Source is available in the following models:

Models with a single super LED (SLED) covering a conventional
wavelength range (5 models).

Models with two SLEDs, covering a wider range for coarse
wavelength-division multiplexing (CWDM) and dual-window
applications (2 models).
Serial port (RS-232 DTE)
Fuse holder
Power inlet
GPIB port
400 Godin Ave.
Québec, Que., Canada G1M 2K2
GPIB IEEE 488.2
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Made in Canada
P/N
S/N
Ver.
Mfg.
date
QST-151E
Serial Port
MODEL: GO
100-240 V
50/60 Hz
2 A
F2AL250 V
Ground