EXFO FLS-2200, User Manual

Page: 14 / 185

Broadband Source
5
2 Safety Information
Your instrument is a Class 1M laser product in compliance with standards
IEC 60825-1 2007 and 21 CFR 1040.10. Invisible laser radiation may be
encountered at the output port.
The product is safe under reasonably foreseeable conditions of operation
but it may be hazardous if you use optics within a diverging or collimated
beam.
Do not view directly with optical instruments.
The following label(s) indicate that the product contains a Class 1M source:
W
ARNING
Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
W
ARNING
The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.
I
MPORTANT
When you see the following symbol on your unit , make sure
that you refer to the instructions provided in your user
documentation. Ensure that you understand and meet the required
conditions before using your product.