EXFO FLS-2200, User Manual

Page: 121 / 185

IEEE 488.2 and Specific Command Reference
112
FLS-2200
IEEE 488.2 Commands—Description
IEEE 488.2 Commands—Description
*CLS
Description The *CLS command clears the Standard Event
Status Register and the Error/Event Queue.
Syntax *CLS
Parameter(s) None
*ESE
Description The *ESE command sets the Standard Event
Status Enable Register bits, as defined in the
table below. This register contains a mask value
for the bits to be enabled in the Standard Event
Status Register.
Syntax
*ESE<wsp><RegisterValue>
Parameter(s) RegisterValue:
The program data syntax for <RegisterValue> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element.
The <RegisterValue>, expressed in base 2,
represents the bit values of the Standard Event
Status Enable Register.
LSB
OPC N.U. QYE N.U
MSB
Standard Event Status Enable Register
DDE PON
CME EXE N.U EXE
DDE