Exerpreutic 1301.6-083116, Owner'S Manual

Page: 14 / 29

2. Handrails, Foot Bars and Rotation Rod Installation:
Use the two 6mm Allen Wrenches to remove the two Pre-Assembled Bolts (19) , two
Spring Washers (20) , two D Washers (21) , and two Wave Washers (36) from the
Rotation Rod (22) . Lubricate the Rotation Rod (22) with the grease provided, and slide
it through the tube on the top of the Mainframe (1) . Slide a Wave Washer (36) onto
each side of the Rotation Rod (22) , attach the Left Handrail (10) onto the Rotation
Rod (22) and secure it in place with one Bolt (19) , one Spring Washer (20) , one D
Washer (21) .
Repeat this Step for the
Right Handrail (9) then tighten the Bolts (19) using the two
6mm Allen Wrenches provided.
Attach a
Cap (14) onto the Bolt (51) and Nylon Nut (13) on each Foot Bar (11) .
ASSEMBLY
Tool:
12
(14) Cap
4 PCS
Hardware:
6mm Allen Wrench
2PCS