3. Foot Pedal Support Bracket and Right Bolt for Crank Installation
Attach the
Foot Pedal Support Bracket (72)
onto the right side of the right
Foot Bar
(11)
with two
Bolts (73)
, two
Washers (74)
, and two
Nylon Nuts (75)
. Use the
Open-Ended Flat Wrench
and
6mm Allen Wrench
to secure the
Foot Pedal Support
Bracket (72)
to the
Foot Bar (11)
.
Lubricate the
Right Crank Bolt (15R)
with some grease provided.
Insert the
Right Crank Bolt (15R)
and
Wave Washer (36)
through the RIGHT
side of the
Foot Bar (11)
. Align the
Foot Bar (11)
with the
Right Crank (79)
so that they
are
perfectly center.
Screw the
Right Crank Bolt (15R)
through the crank by turning it
CLOCKWISE
by hand until it stops, Then thoroughly tighten the
Right Crank Bolt (15R)
with the
8mm Allen Wrench
. Put a
Spring Washer (18)
on the threaded end of the
Right
Crank Bolt (15R)
and attach the
Right Nylon Nut (17R)
.Using the
Open-Ended Wrench
and
8mm Allen Wrench
, secure the
Right Nylon Nut (17R)
.
Proper tightness is extremely important to prevent parts from coming loose or
damaging the unit.
Cover the
Right Nylon Nut (17R)
with
Cap (76)
.
R for right bolt
Important:
Installing right bolt into right
crank can only be done by
turning right (clockwise).
Tool:
Open-Ended Flat Wrench
ASSEMBLY
13
6mm Allen Wrench
2PCS
8mm Allen Wrench
Summary of Contents for 1301.6-083116
