Exerpreutic 1301.6-083116, Owner'S Manual

Page: 13 / 29

1. Front and Rear Stabilizers Installation:
Step A:
Align the Front Stabilizer (7) onto the front curve of the Mainframe (1) , With
the Transport Wheels (8) facing forward. Align the holes and attach two Bolts (4) and
on the other ends of bolts attach two Big Curve Washers (6) and two Cap Nuts (5) .
Tighten the Cap Nuts (5) using the Open-Ended Flat Wrench provided.
Step B: Align and attach the Rear Stabilizer (2) onto the rear curve of the Mainframe
(1) ,using two Bolts (4) .On the other end of the Bolts (4) , Attach two Big Curve
Washers (6) , and two Cap Nuts (5) . Tighten the Cap Nuts (5) using the Open-Ended
Flat Wrench provided.
Hardware:
ASSEMBLY
11
Tool:
Open-Ended Flat Wrench
(4) Bolt 4 PCS (5) Cap Nut 4 PCS (6) Big Curve Washer
4 PCS