13
ASSEMBLY
Step 4
Note:
We recommend two people work together to install the
Backrest Frame (10).
Note:
The
Hex Bolts (51)
should be installed from the inside as shown in the illustration
above.
4A. Installing the Backrest:
Slide the brackets of the
Backrest Frame (10)
onto the left
and
right
Pivot Arms (9).
Aligning the holes of the the
Pivot Arms (9)
with the brackets of the
Backrest Frame (10).
Secure
with two
Hex Bolts (51),
two
Flat Washers (59),
and two
Nylon Nuts (61).
Tighten
the hardware
with the
two
13, 17mm Wrenches
provided
.
4B.
NOW
fully tighten the four
Socket Hex Bolts (47)
using the
two
13, 17mm Wrenches
provided
.
Note: Fig. B
shows a correctly installed
Pivot Arm (9)
and
Backrest Frame (10).
Hardware:
(51) Hex Bolt
4PCS
(59) Flat Washer
4PCS
(61) Nylon Nut
4PCS
Fig. B
Tools:
13,17mm Wrench
2PCS
These parts must be
on same side when
installing the backrest.
