Alberta E-Vent User Manual Version 1.3 June 3, 2020
13
5.2.
Assembling the Patient Valve
Step 1.
The Patient Valve is assembled by pulling a
valve out of one of the BVMs.
Step 2.
Clip the top of the port with scissors. This
can be seen in the figure (orange circles).
This enables the User Interface pressure
sensing tubing to fit over the port and create
a seal.
Figure 5-1 Adapted Patient Valve
Figure 5-2 Comparison of Adapted Patient Valve vs. Patient Valve
supplied with BVM
