background image

602471_1009

1-3

BigDog™ MOWERS X SERIES 

TWO YEAR (1200 HOURS) LIMITED WARRANTY

OR

FOUR YEAR (500 HOURS) LIMITED WARRANTY

OR

90 DAYS LIMITED WARRANTY IN RENTAL APPLICATIONS

OPTIONAL WARRANTY POLICIES

The purchaser must choose one of the following warranty poli-
cies upon purchasing the machine:

a. Two (2) Year (1200 Hours) Limited Warranty
b. Four (4) Year (500 Hours) Limited Warranty
c. Rental Units (90 days) Limited Warranty

WHAT IS COVERED BY THIS WARRANTY

BigDog™ Mowers, makes the following warranty to the origi-
nal purchaser only:

a. Two (2) Year (1200 Hours) Limited Warranty:

BigDog™ Mowers are warranted for 

two (2) years or

1200 hours, whichever comes first from date of
delivery,

 on all materials and workmanship. 

If the Purchaser discovers within this warranty period
such a defect: 

O

He must promptly notify BigDog™ Mowers, or an
authorized dealer, in writing of the defect. In no event
shall such notification be received by BigDog™
Mowers, or an authorized dealer later than 30 days
after expiration of warranty. 

O

Within a reasonable time after such notification, Big-
Dog™ Mowers, will correct any defect in material or
workmanship on the BigDog™ Mowers, by repairing
or replacing part(s) with either new or used replace-
ment parts.  

O

Such repair, including parts and labor shall be at the
expense of BigDog™ Mowers, and,

b. Four (4) Year (500 Hours) Limited Warranty: 

BigDog™ Mowers are warranted for

 four (4) years or

500 hours, whichever comes first from date of
delivery,

 on all materials and workmanship. 

If the Purchaser discovers within this warranty period
such a defect:

O

He must promptly notify BigDog™ Mowers, or an
authorized dealer, in writing of the defect. In no event
shall such notification be received by BigDog™
Mowers, or an authorized dealer later than 30 days
after expiration of warranty. 

O

Within a reasonable time after such notification, Big-
Dog™ Mowers, will correct any defect in material or
workmanship on the BigDog™ Mowers, by repairing
or replacing part(s) with either new or used replace-
ment parts. 

O

Such repair, including parts and labor shall be at the
expense of BigDog™ Mowers, and,

c. Rental Units (90 days) Limited Warranty:

 Within 90

days of date of delivery BigDog™ Mowers, provides a
limited warranty on all materials and workmanship for
units used for rental purposes.  
If the Purchaser discovers within this warranty period
such a defect:

O

He must promptly notify BigDog™ Mowers, or an
authorized dealer, in writing of the defect. In no event
shall such notification be received by BigDog™
Mowers, or an authorized dealer later than 30 days
after expiration of warranty. 

O

Within a reasonable time after such notification, Big-
Dog™ Mowers, will correct any defect in material or
workmanship on the BigDog™ Mowers, by repairing
or replacing part(s) with either new or used replace-
ment parts. 

O

Such repair, including parts and labor shall be at the
expense of BigDog™ Mowers, and,  

d. The engine warranty

 is covered by the engine

manufacturer, to the original owner only, and,

e. The battery

 is covered by a one (1) year limited

warranty to the original owner only. 

WHO MUST PERFORM THE WARRANTY SERVICE

All warranty service will be performed by dealers authorized by
BigDog™ Mowers. 

Service calls and/or transportation

expense

 of the product to and from the authorized dealer, for

warranty work, will be paid by the owner of the product. For
warranty service contact an authorized dealer.

WHAT IS NOT COVERED BY THIS WARRANTY

BigDog™ Mowers, does not warranty: 

O

Some product components or parts not manufactured
by BigDog™ Mowers

O

Repairs made by unauthorized persons

O

Damage caused by use of the BigDog™ Mowers for
purposes other than those for which it was designed

O

Damages caused by disasters such as fire, flood,
wind, and lightening

O

Damages caused by neglect, abuse, abnormal use,
improper or unreasonable use, accident, negligence or
misuse

O

Repairs or replacement resulting from the use of
unauthorized parts, accessories or attachments

O

Damage caused by foam filled or solid filled tires.

O

Repairs or replacement as the result if any alterations
or modifications, in the determination of BigDog™
Mowers, which adversely affects the operation, per-
formance or durability of the equipment.

O

A BigDog™ mower which has the serial number
removed or made illegible

O

Depreciation or damage caused by normal wear, lack
of reasonable and proper maintenance, failure to fol-
low the product’s owner’s manual operating, mainte-
nance and adjustment instructions or other
operational instructions provided by BigDog™ Mow-
ers.

O

Normal maintenance parts and service including, but
not limited to, filters, fuel, lubricants, tune-up parts,

Summary of Contents for Big Dog X Series






































Reviews: