background image

1-4

602471_1009

belts, blades, blade sharpening, bearings, brake or
steering adjustments

O

Repairs necessary due to improper fuel, contaminates
in the fuel system, or failure to properly prepare the
fuel system prior to any period of non-use over three
months

DISCLAIMER OF WARRANTY

The foregoing warranties are in lieu of all other warranties,
expressed or implied, including but not limited to the implied
warranties of merchantability and fitness for a particular pur-
pose. However, if the Big Dog Mower is purchased as a con-
sumer product, any implied warranty of merchantability or
fitness for a particular purpose is limited to the duration of this
limited warranty. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not
apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.

LIMITATION OF REMEDIES

In no case shall BigDog™ Mowers, be liable for any special,
incidental, or consequential damages based upon breach of war-
ranty, breach of contract, negligence, strict liability in tort, or
any other legal theory. 
Such damages include, but are not limited to:

O

Loss of profits

O

Loss of savings or revenue

O

Loss of use of a BigDog™ mower or any associated
equipment

O

Cost of capital

O

Cost of any substitute equipment, facilities, services
or downtime

O

The claims of third parties including customers, and
injury to property

Some states do not allow the exclusion or limitation of inciden-
tal or consequential damages, so the above limitation or exclu-
sion may not apply to you.

TIME LIMIT

a. Two (2) (1200 Hours) Year Limited Warranty

Any action for breach of warranty must be commenced
within 30 days following delivery of the goods in a non-
rental application.

b. Four (4) Year (500 Hours) Limited Warranty

Any action for breach of warranty must be commenced

within 30 days following delivery of the goods  in a
non-rental application. 

c. Rental

Any action for breach of warranty must be commenced
within 30 days following delivery of the goods.

NO OTHER WARRANTIES

Unless modified in writing, signed by both parties, and
approved by the President of Excel Industries, Inc., this agree-
ment is understood to be the complete and exclusive agreement
between the parties, superseding all prior agreements, oral or
written, and all other communications between the parties relat-
ing to the subject matter of this agreement. No employee of
Excel Industries, Inc, or any other party is authorized to make
any warranty in addition to those made in this agreement. 

ALLOCATION OF RISKS

This agreement allocates the risks of product failure between
BigDog™ Mowers, and the purchaser. This allocation is recog-
nized by both parties and is reflected in the price of the goods.

OWNER'S RESPONSIBILITY

You must maintain your BigDog™ Mowers Product following
the maintenance procedures described in your owner's manual.
Such routine maintenance, whether performed by a dealer or by
you, is at your expense.

This machine like any other powered equipment is poten-
tially dangerous unless properly operated.

 Any operator

must

 be cautious and keep safety in mind at all times. Any oper-

ator, prior to using the BigDog™ Mowers, should thoroughly
familiarize himself with the owner's manual regarding operation
and safety of the machine, as well as all safety warnings on the
machine itself.

WARRANTY REGISTRATION

1.

Dealers must 

register the unit on-line or by filling out

the Warranty registration form, provided in the owner’s
packet. If using the Warranty registration form it MUST
be completed and signed by the authorized dealer and
original purchaser.

2.

For validation, the completed Warranty registration form
MUST be forwarded to BigDog™ Mowers, within ten
(10) days following date of purchase.

3.

The date of purchase constitutes delivery.

Summary of Contents for Big Dog X Series






































Reviews: