Excalibur AL-1775-3DB, Operation Manual

Page: 8 / 25

Controller & Transmitter Functions (cont’d)
VEHICLE TEMP REQUEST: Press and release “P” then START within
5 seconds
LOCK/UNLOCK STATUS UPDATE REQUEST: Press and release “P”
then LOCK within 5 seconds
• UPON RECEIVING CONFIRMATION, THE
CONTROLLER WILL PLAY A MELODY AND FLASH
THE LEDs TO INDICATE THE VEHICLE’S INTERIOR
TEMPERATURE
• TEMP INDICATORS:
1 LED = LESS THAN 30°F
2 LEDs = 31-60°F
2 LEDs = 61-90°F
4 LEDs = OVER 90°F
• THE SYSTEM WILL SEND A FULL STATUS UPDATE
TO THE CONTROLLER IN CASE THE STATUS
CHANGED WHILE THE CONTROLLER WAS OUT OF
RANGE OR BY ANOTHER CONTROLLER
• THE LOCK OR UNLOCK LED WILL FLASH
• THERE IS NO AUDIBLE INDICATION
2
1
1
2
AUXILIARY FUNCTIONS 1-4 :
The actual operation of these functions will vary from car to car They are designed to
operate extra vehicle functions like automatic sliding doors or motorized hatches Aux
1-4 are virtual outputs only available on certain vehicles when this system is integrated
with the vehicle’s data network. Consult with your installer to find out if any of these
functions are available for your vehicle. If so, confirm each operation with the controller
and write each function in the blank spaces provided below
-
Auxiliary 1 Function (___________________)
: To activate this function, press and
release the T RUNK and S TART buttons simultaneously)
- Auxiliary 2 Function (___________________) : To activate this function, press and
release the L OCK and T RUNK buttons simultaneously)
- Auxiliary 3 Function (___________________) : To activate this function, press and
release the U NLOCK and S TART buttons simultaneously)
- Auxiliary 4 Function (___________________) : To activate this function, press and
release the U NLOCK and T RUNK buttons simultaneously)
7