Excalibur AL-1775-3DB, Operation Manual

Page: 5 / 25

Controller & Transmitter Functions (cont’d)
UNLOCK / DISARM:
Press and release the UNLOCK button
• THE SIREN WILL CHIRP TWICE & THE PARKING LIGHTS
WILL FLASH TWICE
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL FLASH THE UNLOCK
LED (TWICE FOR CAR 2) AND BEEP TWICE
TRUNK RELEASE / CHANNEL 2: Press the TRUNK button for 3
seconds
• THE SYSTEM WILL UNLOCK/DISARM AND THE TRUNK
WILL OPEN (IF EQUIPPED)
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL FLASH THE TRUNK LED
(TWICE FOR CAR 2) AND BEEP TWICE .
REMOTE START: Press and release the START button twice within 5
seconds (see user feature #8 to change)
• THE PARKING LIGHTS WILL FLASH ONCE AND THE STATUS
LIGHT WILL FLASH RAPIDLY
• THE SYSTEM WILL PROCEED TO START THE ENGINE
• UPON RECEIVING CONFIRMATION, THE CONTROLLER WILL
PLAY THE START MELODY AND FLASH THE START BUTTON
LED ONCE EVERY 1/2 SECOND (TWICE FOR CAR 2)
• ONCE THE ENGINE IS RUNNING, THE PARKING LIGHTS WILL
TURN ON AND THE STATUS LIGHT WILL FLASH SLOWLY
• ALL 4 LED’S ON THE CONTROLLER WILL FLASH EVERY 5
SECONDS INDICATING THE RUN TIME IS AT 100% EACH LED
REPRESENTS 25% OF THE RUN TIME AND THEY WILL STOP
FLASHING ONE AT A TIME AS THE RUN TIME DECREASES
• If the engine stalls, the system will make up to 3 more attempts
• Each time you park, set the climate controls to give you the desired interior
temperature when you use the remote start
• The engine will run for the preset run time (see user feature #1)
(continued on p. 5)
x2
4