AL-1510-EDP
AL-1010-EDP
Status Light
Valet Switch
System
Receive / Transmit
Module
Status Lights
Valet
Switch
Wiring Diagram
Overview
( ( (
ECHO
Starter Interrupt
socket and relay
To Starter
To Ignition
Switch
White
Red
cut wire
15 AMP
Main Wiring Harness Connector
(-) 2nd Channel Output (trunk release) - Gray
Ignition Power Input - Yellow
System (-) Ground - Black
To Constant (+) Power - Red
Secondary Wiring Harness Connector
(-) 3rd Channel Output - Pink
(-) Door Trigger Input - Green
(-) Hood Trigger Input - Blue
(+) Door Trigger Input - Violet
(+) Siren Output - Brown
(+) Parking Light Output - White
Interior Light Output - Green/Violet
(+ or -) Interior Light Input - Black/Red
10 AMP
(-) Starter Interrupt Output - Orange
Main
Harness
8-Pin
5-Pin
Secondary
Harness
Backup
Battery
Port
Slide-On Clip for
optional modular
Backup Battery
Coaxial Antenna Cable: Route end as
high as practical in vehicle, away from metal.
Note: May not be present, or may be removed if the optional 2-way Echo kit is used.
Data
Port
Smart
Trigger
Jumper
(-)
(+)
AL-
-EDP
E CALIBUR
1000
1500
Orange 2-pin Connector
(-) Horn Honk - Brown/Black
(-) Parking Light - White/Black
Auxiliary Sensor Port
Green - Prewarn
Blue - Trigger
Black - Ground
Red - Power
Power Doorlock Port
Pink - Unlock #2 Output
Blue - Unlock #1 Output
Relay Coil Power (pin)
Green - Lock Output
Red 4-pin Connector
White 4-pin Connector
Impact
Sensor
The AL-1510-EDP is a 2-way security system, which
includes a 1-way transmitter and a 2-way controller.
The AL-1010-EDP is a 1-way system, including two
transmitters. The AL-1010-EDP
may be upgraded to
2-way operation by using an optional Omega Echo kit.
10 AMP
Page - 18
Page - 19
