Exalt EX-4.9r Installation And Configuration Manual Download Page 8 | Manualshive

Page: 8 / 115

Exalt EX-4.9r Installation And Configuration Manual Download Page 8

Exalt Communications Inc.

r-series Installation and Management Manual

5000007 (ETS)

viii

2007-02-12 (draft)

Safety Notices

1.

Review this entire guide for important installation instructions BEFORE attempting to
install this product.

2.

This product is intended to be installed, used, and maintained by experienced
telecommunications personnel only.

3.

Employ a properly licensed or authorized electrician to install or evaluate/certify the
installation of all power and grounding related to the use of this equipment and all
connected devices.

4.

The device(s) shall only be connected to AC power sources provided by the supplier or to
DC sources within the device specifications (FCC/IC only). Use a separate breaker circuit
at the power source.

5.

Lightning, surge protection devices, and earth grounding are required for most installations
to ensure human safety. Consult a qualified electrician.

6.

Servicing of this device should be performed by authorized personnel only. Do not
disassemble this device. By opening or removing any covers you may expose yourself to
hazardous energy parts. Incorrect reassembly of this product can cause a malfunction,
and/or electrical shock, when the unit is subsequently used.

7.

Do not connect or disconnect the power connection to the device when the power supply is
plugged into an AC outlet. To connect, first connect the power connection to the device,
and then apply power (or plug in) at the outlet. To disconnect, disengage power at the outlet
or unplug, and then disconnect the direct connection to the device.

8.

Do not insert any object of any shape or size inside this product at any time, whether
powered or not. Objects may contact hazardous energy components that could result in a
risk of fire or personal injury.

9.

Liquids shall not come in contact with, or enter the inside of the device at any time.

10.

Proper ventilation and/or airflow shall be provided surrounding the equipment. Items shall
not come in contact with heat-sinking materials. Ensure that ambient operational and
storage temperature specifications are maintained at all times.

11.

Equipment is suitable for mounting on noncombustible surfaces only.

12.

Do not move or alter the marking labels.

«
...
6
7
8
9
10
...
»

Summary of Contents for EX-4.9r




















































































































Reviews:

No comments