Exalt Communications, Inc.
r-series
Installation and Management Manual
5000007 (ETSI)
39
2007-02-12 (draft)
If all other parameters are still configured at their factory default settings, the radios can now be
connected back-to-back to verify that the link is communicating and perform any other desired
tests. See Back-to-back Bench Testing on page 82 for test information.
Navigating the GUI describes each page of the GUI. Most configuration parameter settings are
intuitive. The following link parameters must match at both ends for the link to communicate:
•
Link Security Key (Administration Settings page)
•
Bandwidth (System Configuration page)
•
RF Frequency (System Configuration page)
•
Link Distance (System Configuration page)
•
TDD Frame Size (System Configuration page)
Changing any of these parameters causes a temporary loss of link. The GUI
displays a warning and provides an opportunity to cancel changes.
Navigating the GUI
The GUI provides the primary interface for all configuration and management. There are three
sections of the main GUI window:
•
Summary status information section (upper-left corner)
•
Navigation panel
•
Main window
Figure 14
Exalt GUI window description
Summary Status Section
This section of the Exalt GUI provides a review of the system status.
MAIN WINDOW
NAVIGATION
PANEL
SUMMARY
STATUS