Exalt Communications, Inc.
r-series
Installation and Management Manual
5000007 (ETSI)
54
2007-02-12 (draft)
File Transfer Page
This page allows the administrator to upload and download files to and from the radio. Two
types of files can be uploaded: configuration and radio firmware.
When uploading
Configuration Files, current configuration parameters are immediately overwritten, and
the unit automatically reboots.
When uploading radio firmware files, the file is placed into
reserve memory space. After the new radio firmware file uploads, use the File Activation page to
enable the files (see File Activation Page on page 57).
Up to three types of files can be downloaded: configuration, radio firmware, and MIB. The MIB
file refers to the Management Information Base related to the Simple Network Management
Protocol (SNMP) function, and is only available on models which support SNMP. See Simple
Network Management Protocol (SNMP) on page 58 for more information.
Check the File Activation page before uploading radio firmware files. New file
uploads overwrite the secondary file location. If important files reside in the
primary or secondary file location, download them before uploading the new files.
Only the active radio firmware file can be downloaded. Therefore, to download
the reserve file, it must first be activated (using the Swap button). See File
Activation Page on page 57.
Figure 25
File Transfer page