Exalt Communications, Inc.
r-series
Installation and Management Manual
5000007 (ETSI)
55
2007-02-12 (draft)
Use the following steps to download a file.
1.
Select the type of file to download (configuration or radio firmware).
2.
Click the
Download
button and wait for the radio to prepare the file for download.
For the MIB file download, a second page/link appears (Figure 26).
3.
Left-click the link on the page to download the file to a desired location.
Figure 26
File Transfer page—download file link
File download and upload is useful when configuring several radios with similar settings. A copy
of the configuration file can also help restore radio settings. In addition, a copy of the Exalt
default configuration file is helpful to restore the radio to factory settings.
Do not change the name of any download file. The configuration file must be
named config.nv. To keep track of multiple configuration files, use a folder
naming system or temporarily rename the file, however, it must be named
config.nv before it can be uploaded to a radio. Never change radio firmware file
names under any circumstances.
If copying the same configuration file into multiple radios, take as some parameters will match
and that may be undesirable. However, it may be easier to change just a subset of parameters
rather than every parameter. The following parameters can cause problems or confusion if they
match at each of a link:
•
Radio Name