background image

19

Sensafe.com

MSDS

Section 15 Regulatory Information

Hazard symbols

: Harmful 

Risk phrases

:

 

 

 

R22

: Harmful if swallowed

 

 

 

R36/37/38

: Irritating to eyes,  

 

 

 

         respiratory system and skin  

 

 

 

R31

: Contact with acids liberates  

 

 

 

         toxic gas.

 

 

 

R52

: Harmful to aquatic organisms.

Safety phrases

:

S22

: Do not breathe dust.

S36/37/39

: Wear suitable protective clothing, gloves and eye / face 

protection.

S26

: In case of contact with eyes, rinse immediately with plenty of 

water and seek medical advice.

S45

: In case of accident or if you feel unwell, seek medical advice 

immediately (show the label where possible)

S61

: Avoid release to the environment. Refer to special instructions / 

safety data sheets.

NOTE

: The regulatory information given above only indicates the 

principal regulations speci

fi

 cally applicable to the product described 

in the material safety data sheet. The user’s attention is drawn to the 

possible existence of additional provisions which complete these 

regulations. Refer to all applicable national, international and local 

regulations or provisions.

Section 16 Other Information

Other Information

: Amended by Scafell Organics

Risk phrases used in s.2

:

 

R22

: Harmful in swallowed.

 

R36/37/38

: Irritating to eyes, respiratory system and skin.

 

R31

: Contact with acids liberates toxic gas.

 

R52

: Harmful to aquatic organisms.

Legal disclaimer

: The above information is believed to be correct but 

does not purport to be all inclusive and shall be used only as a guide. 

This company shall not be held liable for any damage resulting from 

handling or from contact with the above product

Summary of Contents for Well EZ





















Reviews: