6
Information
english
Operating, safety, and servicing instructions
Please read these operating, safety, and servicing instructions carefully before using
the beveller. Also store this instruction book somewhere accessible to everyone
using the pipe saw. In addition to these instructions, always follow the of cial
work, health and safety regulations. The Exact PipeBevel 220E/360E is meant for
professional use only.
Technical data
Model
PipeBevel 220E
PipeBevel 360E
Voltage
220 - 240 V / 50 - 60 Hz
220 - 240 V / 50 - 60 Hz
Power
1400 W
1400 W
No-Load speed
7000-10500 /min
7000-10500 /min
Intermittent operation
2,5 min ON /
7,5 min OFF (S3 25%)
2,5 min ON /
7,5 min OFF (S3 25%)
Blade holder diameter
48 mm
48 mm
Blade tip
15,4 mm × 15,4 mm
15,4 mm × 15,4 mm
Weight
6,7 kg
11,7 kg
Range of use Ø
25 mm - 220 mm
110 mm - 360 mm
Max. pipe wall
10 mm
10 mm
Protection class
/ II
/ II
Spindle lock
YES
YES
Speed preselection
YES
YES
Constant electronic control
YES
YES
Overload Protection
YES
YES
Reduced starting current
YES
YES
Vibration ah
< 2,5 m/s
2
< 2,5 m/s
2
LpA (sound pressure)
86 dB(A)
94 dB(A)
KpA (sound pressure uncertanity)
3 dB(A)
3 dB(A)
LWA (acoustic power)
97 dB(A)
105 dB(A)
KWA (acoustic power uncertanity)
3 dB(A)
3 dB(A)
The values given are valid for nominal voltages [U] of 230/240V. For lower voltage and models for
speci c countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the
individual machines may vary. Only for power tools without reduced starting current: Starting cycles
generate brief voltage drops. Interference with other equipment/machines may occur in case of
unfavourable mains system conditions. Malfunctions are not to be expected for system impedances
below 0.36 ohm.
7
Information
english
Noise/Vibration Information
Measured values determined according to EN60745.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN60745:
Vibration emission value a
h
=< 2,5 m/s
2
, UncertaintyK =1.5 m/s
2
.
The vibration emission level given in this information sheet has been measured in accordance with
a standardized test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may signi cantly increase the exposure level
over the total working period. An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not actually doing the job.
This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Exact PipeBevel 220E/360E system, Package
contents:
Please check the package contains the following items:
1. Exact PipeCut System shoulder bag
2. Exact PipeBevel 220E or 360E bevelling machine
3. Cutting supports 2 pcs
4. Operating instructions
5. Hex socket key 5 mm tted to the machine
6. Carbide blade tips 3 pcs assembled to the blade holder of the machine
7. DVD-video disc with instructions
Technical data
Operating, safety, and servicing instructions
Please read these operating, safety, and servicing instructions carefully before using the beveller.
Also store this instruction book somewhere accessible to everyone using the pipe beveling machine.
In addition to these instructions, always follow the official work, health and safety regulations.
The Exact PipeBevel 220E/360E is meant for professional use only.
Noise/Vibration Information
Measured values determined according to EN60745.
Wear hearing protection!
Vibration total values (triax vector sum) determined according EN60745:
Vibration emission value ah =< 2.5 m/s
2
, Uncertainty K =1.5 m/s
2
.
The vibration emission level given in this information sheet has been measured in accordance with
a standardized test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total
working period. An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working period. Identify additional safety measures
to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organization of work patterns.
Exact PipeBevel 220E/360E system, Package contents:
Please check the package contains the following items:
1. Exact System shoulder bag
2. Exact PipeBevel 220E or 360E beveling machine
3. Beveling supports 2 pcs
4. Operating instructions
5. Hex socket key 5 mm fitted to the machine
6. DVD-video disc with instructions
6.
Model
PipeBevel 220E
PipeBevel 360E
Voltage EU
220 - 240 V / 50 - 60 Hz 5,6 A
220 - 240 V / 50 - 60 Hz 5,6A
Voltage US
110-120V / 60Hz 9.2 A
110-120V / 60Hz 9.2 A
Power EU
1495 W
1495 W
Power US
1440 W
1440 W
No-Load speed
7 000–10 500 / min
7 000–10 500 / min
Intermittent operation
2.5 min ON /
2.5 min ON /
7.5 min OFF (S3 25 %)
7.5 min OFF (S3 25 %)
Blade holder diameter
1.88” (48 mm)
1.88” (48 mm)
Blade tip
0.60” x 0.60” (15.4 mm x 15.4 mm)
0.60”x 0.60” (15.4 mm x 15.4 mm)
Weight
14.7 lbs (6.7 kg)
25.7 lbs (11.7 kg)
Range of use Ø
1”–8.6” (25 mm–220 mm)
4.3”–14” (110 mm–360 mm)
Max. pipe wall
0.4” (10 mm)
0.4” (10 mm)
Protection class
⧈
/ II
⧈
/ II
Spindle lock
YES
YES
Speed preselection
YES
YES
Constant electronic control
YES
YES
Overload Protection
YES
YES
Reduced starting current
YES
YES
Vibration ah
< 2.5 m/s
2
< 2.5 m/s
2
LpA (sound pressure)
86 dB(A)
94 dB(A)
KpA (sound pressure uncertanity)
3 dB(A)
3 dB(A)
LWA (acoustic power)
97 dB(A)
105 dB(A)
KWA (acoustic power uncertanity)
3 dB(A)
3 dB(A)
The values given are valid for nominal voltages [U]
of US 110–120 V and EU 220–240 V.
Please observe the article number on the rating plate of your machine. The trade names of the individual
machines may vary. Only for power tools without reduced starting current: Starting cycles generate
brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains
system conditions. Malfunctions are not to be expected for system impedances below 0.36 ohm.
