4
Declaration of Conformity
We declare under our sole responsibility that the products described under “Technical Data” are in
conformity with the following standards or standardization documents: EN60745-1, EN60745- 2-5,
EN55014-1, EN 55014-2, EN61000-3-2, EN61000-3-3 according to the provisions of the directives
2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address.
The technical le is available at the address underneath.
The person authorized to compile the technical le:
Mika Priha, R&D manager ([email protected])
Helsinki, 01.02.2016
Seppo Makkonen, Managing director
Exact Tools Oy
Särkiniementie 5 D
FI-00210 Helsinki
Finland
5
Contents
The original language of this manual is english
english
Contents
6. Technical data
6. Package contents
Safety
7. Safety instructions
Operation
10. Functional description
10. Product features
11. Before operating the tool
11. Connection to the mains power supply
11. Setting the pipe on supports
12. Attaching the beveller to the pipe
12. Approaching the pipe wall
12. Bevelling the pipe
13. Spin-speed regulator and overload protection
14.
Replacing new cutting tips / turning sharp edges of the cutting tips / changing the
complete cutting head.
15.
Service and maintenance instructions
15.
Environment /
Disposal
15.
Guarantee/
Guarantee conditions
16.
Tips for users
Exploded view
(separate attachment)
De nitions: Safety guidelines
The de nitions below describe the level of severity for each signal word. Please read the manual and
pay attention to these symbols.
DANGER
: Indicates an imminently hazardous situation which, if not avoided,
will
result in
death or serious injury
.
WARNING
: Indicates a potentially hazardous situation which, if not avoided,
could
result in
death or serious injury
.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided,
may
result in
minor or moderate injury
.
NOTICE
: Indicates a practice
not related to personal injury
which, if not avoided,
may
result
in
property damage
.
Denotes risk of electric shock.
Contents
Safety
2 Blade tip information for Exact PipeBevel 220E/360E
2 Product features
3 Product features figure
4 Declaration of Conformity
6 Technical data
7 Package contents
8 Safety instructions
Operation
12 Functional Description
13 Before Operating the tool
14 Attaching the beveller to the pipe
14 Approaching the pipe wall
14 Beveling the pipe
15 Spin-speed regulation and overload protection
16 Replacing new cutting tips / Turning sharp edges of the cutting tips /
Changing the complete cutting head
17 Service and maintenance instructions
17 Environment / Disposal
17 Guarantee
18 Tips
Definitions: Safety guidelines
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
DANGER:
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE:
Indicates a practice not related to personal injury which, if not avoided,
may result in property damage.
Denotes risk of electric shock.
Declaration of Conformity
We declare under our sole responsibility that the products described under “Technical Data” are in
conformity with the following standards or standardization documents: IEC 60745-2-17, EN60745- 2-5,
EN55014-1, EN 55014-2, EN61000-3-2, EN61000-3-3 according to the provisions of the directives
2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address. The technical file is
available at the address underneath. The person authorized to compile the technical file:
Seppo Makkonen, Managing Director ([email protected])
