Functional characteristics
TIG welding
099-00T500-EW501
2.9.2022
27
5.1.4.1 Recurring welding tasks (JOB 1-100)
The user has 100 additional memory locations at their disposal to save recurring or different welding
tasks on a permanent basis. To do so, simply select the required memory location (JOB 1-100) and set
the welding task as described previously.
With the JOB manager
> see 5.6 chapter
, welding tasks can be copied to any preset or reset to the fac-
tory settings.
The desired JOB can also be assigned to a quick access button (favourites button)
> see 5.5 chapter
.
Switching a JOB is only possible if no welding current flows. Up-slope and down-slope times can be set
individually for latched and non-latched operation.
Selection
Cel
4s
Figure 5-4
When one or more of the recurring welding tasks has been selected, the JOB signal light comes on.
