22
CA S M
8.0 Maintenance
Personnel
• Daily maintenance work described herein can be per-
formed by the operator.
• Some maintenance tasks should only be performed by
specially trained, qualified personnel employed by the
product owner, or exclusively by personnel of the manu-
facturer; specific reference will be made in each case in
the description of the respective maintenance task.
• Only professional electricians should perform work on
electrical equipment.
8.1 Maintenance plan
Maintenance tasks that are required for optimal and trou-
ble-free operation are described in the sections below.
If increased wear is detected during regular inspections,
shorten the required maintenance intervals according to the
actual indications of wear.
CASM linear actuator maintenance plan
Interval
Maintenance work
To be carried out by
Daily
Check actuator for visible damage (⮑ 8.2.3 Check of visual condition).
Operator
Clean off dust and dirt if necessary (⮑ 8.2.1 Cleaning).
Operator
Monthly
Check tight fit of the rod and options, correct if necessary. Check connection for tight fit.
Qualified personnel
Annually
Check labels and warning notices for legibility and replace if necessary.
Qualified personnel
Check sealings for damage (⮑ 8.2.2 Check sealing function).
Qualified personnel
Semi-annually
Check options for visible damage
Qualified personnel
NOTICE
If the linear actuator is used outside of the environmental
conditions specified earlier in this manual, check such
components once a month for any changes such as oxidation or
sedimentation.
Summary of Contents for CASM-32
Page 2: ......
