EVVA Xesar 3.0 System Manual Download Page 51

Page: 51 / 209

KPM.X.Systemhandbuch_X3.0.EN.V1.9 | Subject to misprints and technical changes.

4.1.1

Xesar upgrade compatibility

Tar-
get/ac-
tual

X1.0

X1.1

X2.0

X2.1

X2.2

X3.0

X1.0

X1.1

X2.0

X2.1

X2.2

X3.0

Exclusively Xesar 2.2 systems can be upgraded to Xesar 3.0!

Valid for firmware and software!

The following Xesar Tablets are supported by Xesar 3.0:

Xesar Tablet V3 (EVVA (Ares F716XM))
Xesar Tablet V2 (Acer Iconia One 7 (B1-770 & B-730HD))

4.1.2

Upgrade instructions for Xesar 2.2 systems to Xesar 3.0

Please note the text fields highlighted in yellow for the upgrade labelled as: "For upgrades
from Xesar 2.2 to Xesar 3.0 only".

For upgrades from Xesar 2.2 to Xesar 3.0 only

Proceed as follows to upgrade the Xesar software from Xesar 2.2 to Xesar 3.0:

•

Insert your Admin Card into the slot of the coding station and load the data from
your Xesar 2.2 system (see section 6.1 Xesar Installation Manager, step 8; load-
ing the Admin Card)

•

Import your Xesar 2.2 database file when adding a new system.

Attention: The following items are important for an upgrade from Xesar 2.2
to Xesar 3.0:

•

For the X2.2 data import, the personal firewall must always allow mounting or it
may not block the required ports.

Summary of Contents for Xesar 3.0


















































































































































































































Search results

Summary of Contents for Xesar 3.0

Reviews:

EVVA Xesar 3.0, System Manual, Page: 51 / 209

Search results

Summary of Contents for Xesar 3.0

Reviews: