EVVA Xesar 3.0 System Manual Download Page 161

Page: 161 / 209

161

KPM.X.Systemhandbuch_X3.0.EN.V1.9 | Subject to misprints and technical changes.

Please contact your system administrator if you encounter any issues during setup.

7.13.2

Commissioning a Xesar network adapter

Figure 180: Xesar network adapter | Jumper position

•

Check the jumper position



of the Xesar network adapter.

Both jumpers must be set to OFF (bottom position).

Figure 181: Xesar network adapter | Connections

•

Connect the mains adapter to the Xesar network adapter.

•

The green, flashing status LED indicates whether the Xesar network adapter is sup-
plied with power.

•

Then connect the Xesar network adapter to the configuration PC.
For this purpose, use an RJ45 LAN cable and make sure the connector engages
audibly in the socket.

Figure 182: Xesar network adapter | IP address (updater unit)

Summary of Contents for Xesar 3.0


















































































































































































































Search results

Summary of Contents for Xesar 3.0

Reviews:

EVVA Xesar 3.0, System Manual, Page: 161 / 209

Search results

Summary of Contents for Xesar 3.0

Reviews: