EVS XT2+, Technical Reference Hardware Manual

Page: 41 / 87

XT2+ Series DISK RECORDER - Version 10.05 - Hardware Technical Reference Manual Issue
10.05.A EVS Broadcast Equipment SA – July 2011
33
Pin
#
Sub-DB15 #1
Inputs 1-8 (mono)
Sub-DB15 #2
Inputs 9-16 (mono)
Sub-DB15 #3
Outputs 1-8 (mono)
Sub-DB15 #4
Outputs 9-16 (mono)
12 GND GND GND GND
13 AES input 5/6 - AES input 13/14 - AES output 5/6 - AES output 13/14 -
14 GND GND GND GND
15 AES input 7/8 - AES input 15/16 - AES output 7/8 - AES output 15/16 -
Analogue DB15 Connectors
Pin
#
Sub-DB15 #1
Inputs 1-4 (mono)
Sub-DB15 #2
Inputs 5-8 (mono)
Sub-DB15 #3
Outputs 1-4 (mono)
Sub-DB15 #4
Outputs 5-8 (mono)
1 GND GND GND GND
2 Analogue input 1 + Analogue input 5 + Analogue output 1 + Analogue output 5 +
3 GND GND GND GND
4 Analogue input 2 + Analogue input 6 + Analogue output 2 + Analogue output 6 +
5 GND GND GND GND
6 Analogue input 3 + Analogue input 7 + Analogue output 3 + Analogue output 7 +
7 GND GND GND GND
8 Analogue input 4 + Analogue input 8 + Analogue output 4 + Analogue output 8 +
9 Analogue input 1 - Analogue input 5 - Analogue output 1 - Analogue output 5 -
10 GND GND GND GND
11 Analogue input 2 - Analogue input 6 - Analogue output 2 - Analogue output 6 -
12 GND GND GND GND
13 Analogue input 3 - Analogue input 7 - Analogue output 3 - Analogue output 7 -
14 GND GND GND GND
15 Analogue input 4 - Analogue input 8 - Analogue output 4 - Analogue output 8 -
2.7 CONNECTING MULTIPLE EVS VIDEO
SERVERS ON XNET
The XNet network is composed by several EVS video servers all connected with a
75-Ohm coaxial cable (BNC).
The exchange between systems is operated through the SDTI interface at 1485
Mbps.
On XT2+ servers there is one pair of SDTI connectors: XNet2 Non-Relay
connectors that are used at 1485 Mbps.
The SDTI loop is closed only when the Multicam software is started. It is therefore
recommended to use XHub when using Non-Relay connectors to avoid network
interruptions.
The XNet requires a network server dedicated to the management of the Database
shared among all LSM-EVS video servers. This is assigned to one of the LSM-EVS
servers on the network. The EVS server acting as the network server can of
course be used for standard LSM/video server operation.