XT2+ Series DISK RECORDER - Version 10.05 - Hardware Technical Reference Manual
Issue
10.05.A
EVS Broadcast Equipment SA – July 2011
49
TF (transfer)
Blinks green
while data transfers occur between the COD module and the
HCTX board
M1, M2, M3, M4 not yet used
C
ONNECTORS ON THE
COD
A
AND
COD
B
M
ODULES
Connector
SD mode
HD mode
Connector label on rear
panel
J1
SDI/CVBS (*)
monitoring output
(SD)
SDI/CVBS(*) monitoring
output (SD, down-
converted)
Character Outs, CVBS/SDI
J2
SDI monitoring
output (SD)
SDI monitoring output
(SD, down-converted)
Used for multiviewer input
J3
Loop-through for
the SDI input
signal (SD)
SDI program output
(SD, down-converted)
SD Out
J4
SDI monitoring
output (SD)
HD SDI monitoring
output
(HD)
Character Outs, SD/HD
J5
Not installed
Not installed
n.a.
J6
SDI program
output
(SD)
HD SDI program output
(HD)
SD/HD Out
J7
SDI program
output
(SD, identical to
J6)
HD SDI program output
(HD, identical to J6)
SD/HD Out
J8
SDI input
(SD)
HD SDI input
(HD)
SD/HD In
J9
Alternate SDI input
(SD, for hardware
loop)
Alternate HD SDI input
(HD, for hardware loop) Used for loop in
(*) The switch between SDI and CVBS on J1 is done by a software setting in the EVS
Configuration menu.
Note
The loops of the input signal are not genlocked.
Summary of Contents for XT2+
Page 1: ...Technical Reference Hardware Version 10 05 July 2011 Production Playout Server ...
Page 2: ......
Page 4: ......
