EVS Synapse U4T100, Installation & Configuration Manual

Page: 17 / 68

EVS Broadcast Equipment SA
15
#V-delayA ~ #V-delayD
V-Delay
setting allows adjustment of the vertical phase of the
corresponding output signal with respect to the selected reference
input.
The
V-Delay
setting gives a delay in addition to the reference
timing. For example: if the
V-Delay
is set to 10 TV HD lines, the
output signal will be delayed by reference 10 TV HD lines.
The signal is delayed (advanced) with respect to the phase of the
reference signal. The available range is from 0 to a maximum of 1124
lines (dependant on I/O format). The default setting is
0ln
. The
preset master for this is
Out-Frmt
, hence the ‘#’-prefix.
#H-delayA ~ #H-delayD
The H-Delay setting allows adjustment of the Horizontal phase of the
corresponding output signal with respect to the selected reference
input.
The H-Delay setting gives a delay in addition to the reference timing.
For example: if the H-Delay is set to 10 pixels, the output signal will
be delayed by reference 10 pixels. The signal is delayed
(advanced) with respect to the phase of the reference signal. The
available range is from 0 to a maximum of 5124 pixels (dependant on
I/O format). The default setting is
0px
. The preset master for this is
Out-Frmt
, hence the ‘#’-prefix.
#Freeze_A
Freeze
enables the capture of one Video Frame for all 4 channels.
The settings of
Freeze
are
On
or
Off
. The default setting is
Off
.
Lock-Mode
Lock-Mode
determines whether the card is locked to his
input
(
SDI1
or
SDI2
), to the reference (
Ref1
or
Ref2
) or
Auto-SDI
(SDI with automated switchover in case of ref loss).
Ref1
is default
P50-P60_Sync
P50-P60_Sync
determines if the video drops one or two frames
when out of sync in p50 and p60 formats. The
P50-P60_Sync
settings are
One Frame
and
Two Frame