3.
(Q)SFP Status
. Selecting this button displays some of the physical values from the (Q)SFP module.
4.
Identify Module
. This will cause the Connection LEDs on the connector side of this board to blink for
20 seconds.
5.
Card ID
. This groupbox indicates the software
Name
and
Version
and the card's harware
Serial
number.
6.
Board position and measurements
. The board is displayed in the position where it is located in the
frame. When the announcement rate is not set to Off, the board's temperature and power
consumption are indicated.
7.
PSU measurements
. When the PSU is detected, it is displayed as non-transparent in the frame.
When the Announcement Rate is not set to Off, the fan speed and PSU temperatures are indicated.
The overall status, Type, version and serial number are always displayed, even when the
announcement rate is set to Off.
8.
The optional SDI I/O board, when it is detected.
INSTALLATION AND OPERATION MANUAL
Neuron COMPRESS | 5. Graphical User Interface |
17
