EVS LSM-VIA User Manual Download Page 258

Page: 258 / 276

8.3.2.

The Shotbox Screen

Overview of the Shotbox Screen

The Shotbox differs slightly in use mode or edit mode, but it contains the same areas highlighted on the
screenshot below.

Title bar (1)

Page title and button to leave the page.

Controlled Channel (2)

•

Smallest controlled PGM: displayed on a red background in Use mode and in Edit mode.

•

LSM ID of the clip angle or playlist loaded on the smallest controlled PGM: only displayed in Edit
mode and if such a media is loaded.

Page Tabs (3)

Tabs corresponding to the various pages where you can store media. The number of items present on
each page is displayed next to the page number.

Tap the requested tab or swipe to the page using the touchscreen.

246

| January 2022 | Issue 1.4.G

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands