EVS LSM-VIA User Manual Download Page 154

Page: 154 / 276

◦

Audio swap icon

on the individual elements where an audio swap has been set between some

of the audio tracks.

In remote playlists, the transition effects cannot be edited so they are grayed out

Start timecode of the playlist element from the beginning of the playlist

Position in the playlist

Mute button

This button is used to mute the audio tracks from the LSM-VIA Viewer.

◦

: audio is not muted.

◦

: the audio tracks of the element have been muted from the LSM-VIA Viewer or from the

Remote Panel.

Clip LSM ID

Clip name (if defined)

TC IN of the clip

If the User TC has been selected for the clip used, it is displayed in yellow.

Duration of the playlist element (hh:mm:ss:ff)

10.

Speed of the playlist element

Remote clips stored on unavailable remote server are displayed as "Not available" in the
playlist.

Color Code

The following color code apply to the playlist elements.

Color

Meaning

Playlist element not selected.

Playlist element selected.

Remote playlist element selected.

Playlist element loaded on PGM and not selected.

142

| January 2022 | Issue 1.4.G

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands