CHAPTER 5
REFERENCE GUIDE
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-74
091-00006-002 ()
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-75
091-00006-002 ()
5.8 Timers
The EFD1000/500 MAX MFD TIMERS VIEW contains three pilot selectable general timers,
a pilot selectable flight timer and departure time (see
Figure 5-101
). Timer functions
are accessed by selecting the desired timer with the hot key (1/4, 2/4, 3/4 and 4/4). The
timer selected with the Hot Key will have a cyan box around it.
5.8.1 General Purpose Timers
With one of the three general timers selected the pilot can perform the following
operations:
• RSET - Resets the timer to ZERO time if the counts is set to UP, or to the “PRESET”
time if the counts is set to DOWN.
• STRT/STOP – Toggles between the timer running and stopped. When STRT is
pressed the timer resumes counting from its current value.
• UP/DOWN – Toggles the counter between operation as a count UP or Down timer.
Toggling the timer also performs a reset such that the value is either zero or the
preset value.
• PSET – Only enabled if the timer Hot Key is DOWN. Pressing the PSET Hot Key
enables editing of the PRESET value (see
Figure 5-102
),
• Pressing the left Knob cycles between selecting Hours/Minutes/Seconds
for Editing
• Turning the Left Knob edits the selected field of the preset value
• Pressing the Right Knob or pressing the PSET key again exits the PRESET
Edit mode
Figure 5-101
MFD Timers VIEW
