CHAPTER 5
REFERENCE GUIDE
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-42
091-00006-002 ()
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-43
091-00006-002 ()
5.5.6
Chart Timer
The Chart Timer (TMR) function is only available when an IAP chart is selected. When
executing a non-precision approach that requires timing from the final approach fix to
the missed approach point press the TMR Hot Key when crossing the final approach
fix. The TIMER box (see
Figure 5-58
) will appear in the lower right hand corner of the
display to alleviate the pilot from having scan for a timer somewhere else in the panel.
5.5.7
Chart QUICK ACCESS FUNCTION
The APD (AirPort Diagram) QUICK ACCESS FUNCTION can be set to OFF, MANUAL or
AUTO on page 2 of the Main Menu. With APD set to OFF the pilot would need to select
the APD after landing from the List just like selecting an IAP.
With the APD set to MANUAL the APD becomes available upon landing with a single
button press. The message APD: LOAD Airport Diagram will appear in the data bar along
with a magenta APD above the middle button (see
Figure 5-59
). Pressing the button
will cause the APD to pop up on the display.
With the APD set to AUTO, the APD is selected and the CHARTS view becomes active
without any pilot action upon landing.
When the APD is display due to either MANUAL or AUTO chart selection, pressing
“BACK” (lower middle button) will return the display the previously selected MFD view
(
Figure 5-60
).
Figure 5-58
Timer Hot Key
Figure 5-59
APD (Airport Diagram) Button
Figure 5-60
APD (Airport Diagram) Button
