CHAPTER 5
REFERENCE GUIDE
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-38
091-00006-002 ()
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-39
091-00006-002 ()
5.5
Charts
The CHARTS VIEW can be configured by the pilot to present Instrument Approach
Procedure (IAP) charts, Departure Procedure (DP) charts, Standard Terminal Arrival
(STAR) charts, Airport Diagrams (APD), Take-off Minimums and Obstacle Departure
Procedures (MIN), and Alternate Minimums (MIN). (see
Figure 5-49
).
5.5.1 Selecting a Chart
Pilots can select the airport of interest by first pressing the LIST Hot Key. When the
LIST Hot Key is blue with a green back ground the pilot can then press either DEP
for departure airport, DEST for destination airport or NRST for nearest airport (see
Figure 5-50
). Alternatively the pilot can press the left knob under PUSH FOR EDIT
(see
Figure 5-51
) then turn the left knob to change the magenta character, then push
the left knob to advance (see
Figure 5-52
) to the next character and repeat the process
until the desired airport identifier is shown. Once the desired airport is selected use the
right knob to scroll down to the desired chart. If after a chart has been selected and a
different chart at the same airport needs to be reviewed you can either press the LIST
Hot Key and use the right knob to scroll or press the lower right button under ‘sel Chrt’
(see
Figure 5-53
) then use the right knob to cycle through all available charts of the
selected airport.
Figure 5-49
Charts Day VIEW Display
Figure 5-51
Push To Edit Button
Figure 5-50
Push To Edit Button