EVOC PCL-726, Manual

Page: 17 / 32

Installation
•
11
The jumper settings for each output channel are illustrated as Figure 2.4
below. The internal -5V is set as default reference voltage.
Reference
Voltage
Source
External Ref. -10V Ref. -5V Ref.
( default )
Jumper
Setting
EXT
-5V
-10V
EXT
-5V
-10V
EXT
-5V
-10V
Figure 2.4 Reference Voltage Source
Besides, each output channel can be set as Bipolar or Unipolar output. Each
output channel and its corresponding jumpers for mode setup are listed as
follow.
CHANNEL NO. Corresponding Jumper
for output mode
CH0 JP1-1, JP1-2
CH1 JP2-1, JP2-2
CH2 JP3-1, JP3-2
CH3 JP4-1, JP4-2
CH4 JP5-1, JP5-2
CH5 JP6-1, JP6-2
The jumper settings for output channel CH0 are illustrated as Figure 2.5
below. The Unipolar mode is default setting.