Chapter 3 BIOS Setup
EC0-1814(B)
- 35 -
Boot Display Device
This option is used to set the boot display device. CRT1 represents the VGA on-board while
LVDS and DVI are the display connectors on the external graphics card.
Note: when choosing LVDS or DVI, please make sure the graphics devices
supplied by EVOC have been installed on the motherboard; otherwise, there would
be no display when booting or it is unable to boot.
Flat Panel Type
This option is used to set the resolution for the LVDS screens in use, including
18-bit, 24-bit, single-channel and dual-channel, etc. Only when the LVDS graphics
card supplied by EVOC is used and the Boot Display Device option is set to
LVDS, is this option available.
PCIPnP
BIOS SETUP UTILITY
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
IRQ3 [Available]
IRQ4 [Available]
IRQ5 [Available]
IRQ7 [Available]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ14 [Available]
IRQ15 [Available]
←→
Select Screen
↑↓
Select Item
+ - Change Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.57 (c)Copyright 1985-2004, American Megatrends, Inc.
IRQ3 ~ 15
This option is used to specify whether the IRQ number is PNP mode or
reserved for ISA.
