Chapter 3 BIOS Setup
- 34 -
EC0-1814(B)
Chipset
BIOS SETUP UTILITY
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may
cause system to malfunction.
North Bridge Chipset Configuration
DRAM Frequency
[Auto]
Configure DRAM Timing by SPD
[Enabled]
Initiate Graphic Adapter
[PEG/PCI]
Internal Graphics Mode Select
[Enabled
，
32MB]
Boot Display Device
[CRT1]
Flat Panel Type
[1024*768/18/
Single]
South Bridge Chipset Configuration
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.57 (c)Copyright 1985-2004, American Megatrends, Inc.
DRAM Frequency
Configure the frequency for DRAM; it is recommended to use automatic
modification instead of manual modification; otherwise, it will not be able to
power on because it is not supported by DRAM.
Configure DRAM Timing by SPD
BIOS configures the time sequence of the SDRAM according to the contents
of the SPD chip. Most of the memory bank has one small chip to save the
time sequence and capacity of the memory, i.e. the SPD chip.
Initiate Graphic Adapter
This option is used to specify the boot-up priority of the video device type.
Initiate Graphic Mode Select
This option is used to set the system memory size occupied by integrated
graphics card.
