Chapter 3 BIOS Setup
- 28 -
EC0-1814(B)
IDE Configuration
BIOS SETUP UTILITY
IDE Configuration
ATA/IDE Configuration
[Enhanced]
Configure SATA as
[IDE]
Port0 SATA AHCI Speed Gen 2 (3.0 Gb/sec)
Primary IDE Master
:[Not Detected]
Primary IDE Slave
:[Not Detected]
Secondary IDE Master
:[Not Detected]
Secondary IDE Slave
:[Not Detected]
Third IDE Master
:[Not Detected]
Third IDE Slave
:[Not Detected]
Fourth IDE Master
:[Not Detected]
Fourth IDE Slave
:[Not Detected]
←→
Select Screen
↑↓
Select Item
+ - Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.57 (c)Copyright 1985-2004, American Megatrends, Inc.
ATA/IDE Configuration
Mode selection for SATA#1 controller; there are three options: Disabled,
Compatible and Enhanced.
Configure SATA as
SATA controller type selection; there are three options for this item: IDE,
RAID and AHCI. Only when ATA/IDE Configuration is under Enhanced
mode, are RAID and AHCI supported.
Both RAID and AHCI functions require supports from hardware chip and
OS.
Primary ~ Fourth IDE Master/Slave
﹡
Type
Not Installed: no IDE device can be detected by system;
AUTO: automatic detection of IDE parameters when powering on;
CD/DVD: used for ATAPI CDROM;
ARMD: used for various analog IDE devices.
﹡
LBA/Large Mode
Used to set whether to support LBA mode or not.
