Chapter 3 BIOS Setup
EC0-1814(B)
- 29 -
﹡
Block(Multi-sector Transfer)
Used to set whether to support multi-sector simultaneous transfer or not.
﹡
PIO Mode
Used for PIO mode setting.
﹡
DMA Mode
Used for DMA mode setting.
﹡
S.M.A.R.T
Used to set whether to enable S.M.A.R.T function and it is only effective for
the hard disk supporting this function.
﹡
32Bit Data Transfer
This option is used to enable 32-bit hard disk accessing mode, which could
optimize hard disk read and write speed.
Super IO Configuration
BIOS SETUP UTILITY
Configure Super IO Chipset
Floppy A
[1.44MB 31/2"]
OnBoard Floppy Controller
[Enabled]
Serial Port1 Address
[3F8/IRQ4]
Serial Port2 Address
[2F8/IRQ3]
Uart IRQ Attribute
[Level Active Low]
Serial Port3 Address
[200]
Serial Port3 IRQ
[10]
Serial Port4 Address
[208]
Serial Port4 IRQ
[10]
Serial Port5 Address
[210]
Serial Port5 IRQ
[10]
Serial Port6 Address
[210]
Serial Port6 IRQ
[10]
Parallel Port Address
[378]
Parallel Port Mode
[Normal]
Parallel Port IRQ
[IRQ7]
Allows BIOS to Enable or
Disable Floppy
Controller.
←→
Select Screen
↑↓
Select Item
+ - Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.57 (c)Copyright 1985-2004, American Megatrends, Inc.
