1
2
IMPORTANT MESSAGE
IMPORTANT MESSAGE
Thank you for choosing EVO Gimbals as your camera stabilization solution! We know that buying a new
product can be very exciting and we are sure that you probably can not wait to use your new gimbal! Before
you start PLEASE read this manual and become familiar with your gimbal’s components and operating modes.
We highly encourage everyone to also watch our great tutorial videos on our website as a supplement to this
manual.
Your Gimbal comes with (1) pre-installed Lithium Ion Battery. Here are some simple safety precautions you
can take to ensure the best performance for your gimbal’s battery.
- Always handle your gimbal with care.
- Always store your gimbal in a cool dry and well ventilated area.
- Never throw your batteries or gimbal in the trash! Always be sure to recycle them at the appropriate
battery recycling center.
Lithium-Ion batteries should not be exposed to extreme temperatures. Heat and cold stress the batteries.
Always charge and use your batteries at room temperature. If the battery has been exposed to extreme
temperatures, allow the battery to return to room temperature before charging it or using it.
Battery Safety
Warning
Important!
For the latest user manuals, tutorial videos, firmware and calibration instructions please visit our official
wepage at EVOGimbals.com
Your new gimbal comes with a 1 Year Parts & Labor warranty. Be sure to register your warranty by registering
online at EVOGimbals.com
LATEST INFORMATION
WARRANTY
ALWAYS MOUNT YOUR ACTION CAMERA
BEFORE YOU POWER IT ON!
FAILURE TO DO SO CAN DAMAGE THE UNIT!
Your EVO SS has an electronic gyroscope that can be affected by temperature. Always ensure proper
startup calibration to ensure the best performance. Please refer to our tutorials videos on
EVOGimbals.com for more information on proper setup, startup and maintenance calibration.
1. Unscrew to two thumb screws on the back
of the action camera mount.
2. Slide the action camera all the way until it
touches the Tilt Motor. Tighten the the two
thumb screws.
Thumb Screw
(on back)
Tilt Motor
Thumb Screw
(on back)
