background image

20

I

H

5

When using a long AC adapter cord:

Insert the binder (large or small)  I  provided with the base to the hole 

H  (right or left) on the back of the base.

Bundle the AC adapter cord and secure them with the binder  I .

Do not secure the power cord with the binder 

I

.

4

5

NOTE

Insert the screwdriver  B  for stage glass frame provided with the 
base into the notch  A  of the stage glass frame, and rotate it in 
counterclockwise direction to remove the stage glass.

1

3

 

Attaching the illumination cartridge (Optional)

Align the indicator  C  of the illumination cartridge you want to attach 
with the indicator  D  of the

 

illumination cartridge mount, and push in 

the illumination cartridge.

If you want to attach the illumination 
cartridge with a protrusion 

E

 on the 

back, make sure that the illumination 
cartridge does not rotate after the 
illumination cartridge is pushed in.

22

E

NOTE

D

2

2

SZX2-ILLTQ only

You can attach up to four illumination cartridges in the same procedure 
by rotating the illumination selection turret.

Attach the dummy cap 

F

 provided with the base to the 

illumination cartridge mounut not in use.

CAUTION

C

F

B

1

A

Summary of Contents for Olympus SZX2-ILLTQ





































Reviews: