21
SZX2-ILLTQ/ILLTS
B
C
3
Return the stage glass to the original position, and attach it securely
with the screwdriver B for stage glass frame.
You can place the screwdriver for stage glass frame on the
dent C on the back of the column.
3
TIP
When removing the illumination cartridge, pull the illumination
cartridge up and remove it.
TIP
You can attach the commercially available photo sheet filter (75 x 75 mm) to the illumination selection turret.
Up to two photo sheet filters with the thickness of 0.1 mm can be inserted.
TIP
4
Attaching the photo sheet filter (commercially available)
Cut the four corners of the photo sheet filter
by approx. 10 mm using the scissors.
In a same way as
1
on page 20, insert the screwdriver for stage
glass frame into the notch of the stage glass frame and remove the
stage glass.
Place the photo sheet filter A on the desired illumination cartridge
with the back side of the sheet filter inserting under holding pins B
of the turret, and then fit two front corners of the photo sheet filter to
the two concave parts on the front.
Insert the photo sheet filter in the concave part
C
.
Attach the stage glass to the original position.
1
2
3
NOTE
4
A
C
3
B
