23
SZX2-ILLTQ/ILLTS
· You can stabilize the base and reduce the vibration by attaching SZX2-ILLTSA (High stability adapter for ILLT).
· This adapter is effective for using the fluorescence observation system of SZX series or MVX10.
If you use MVX10 for observation, be sure to attach SZX2-ILLTSA (High stability adapter for ILLT).
TIP
NOTE
7
Attaching SZX2-ILLTSA (High stability adapter for ILLT) (Optional)
Use the tools shown in the table below.
Tool
Description
Allen wrench (for M4 screw)
Provided with SZX2-ILLTSA
Hexagon socket screw (M4) Provided with SZX2-ILLTSA
Flip the base to its back and remove the front rubber legs (2 pcs.) A
using the Allen wrench.
TIP
11
Securing the screws attached to the provided rubber legs (2 pcs.) B to
the screw holes (2 positions) used for attaching the rubber legs (2 pcs.)
A using the Allen wrench, attach the provided rubber legs (2 pcs.) B .
2
2
Securing the screws (4 pcs.) to the screw holes (4 positions) at the
back of the base using the Allen wrench, attach SZX2-ILLTSA (High
stability adapter for ILLT) C .
3
Flip the base back to its front and place it down carefully.
4
3
A
B
C
