13
50
min
1.
2.
3.
4.
5.
Caution
• Please use the residual water removal function regularly as the product may develop a bad odor
if this function is not used for an extended period.
• After using the residual water removal function, please wipe off a small amount of water that
may remain on the floor.
After cleaning is complete, remove the water tank or empty the water.
Make sure that the mop is attached to prevent spilling the water.
Press the "Remove residual water" button on the remote control while the main unit is properly placed on the floor.
The water level indicator will blink and remove residual water.
After about �� seconds, when the water level indicator stops blinking, the residual water removal is complete.
Residual water removal
By removing the remaining water from the machine, it maintains the hygiene of the product.
After cleaning in water supply mode, press the "Remove residual water" button on the remote control
to remove the water from the main unit.
Moves along the wall and
concentrates on cleaning corners.
After cleaning corners for ��
minutes, switches to automatic
cleaning mode.
Moves back and forth in Y-shaped
patterns and effectively cleans
the floor.
Stops after automatically cleaning
for �� minutes; great for cleaning
rooms.
Cleans the space around the
product in detail.
Cleans thoroughly by repeating
short straight lines and
���-degree rotations.
Efficiently cleans the entire
space in basic cleaning mode.
Cleans automatically until
the battery is low.
Automatic Cleaning
Intensive Cleaning
Focused Cleaning
Edge Cleaning
Y Cleaning
��-min Cleaning
