12
Water Level �:
Recommended for cleaning tough dirt or dust buildup;
mop pads are moistened sufficiently during cleaning.
Intensive
Focus
Edge
Y-mode
Drain Water
��min
Water Control
Starts automatic cleaning or
stops cleaning operation.
Intensively cleans with straight
and rotating motions.
Moves back and forth in Y-shaped
patterns and cleans the floor.
Intensively cleans a small
surrounding space.
Cleans the floor along walls
and corners.
Stops after cleaning for
�� minutes.
Removes remaining water
inside the main unit.
Controls the amount of water
supplied to mop pads.
Cleans the desired space in
your own pattern.
Start/Stop
Intensive Cleaning
Y Cleaning
Focused Cleaning
Edge Cleaning
��-min Mode
Residual Water Removal
Water Control
Direction Control
• The water tank supplies a constant amount of water to mop pads through electronic control.
• The water supply level can be adjusted with the remote control. Each time the button
is pressed, it instructs the tank in the following order : cut off water, Level �, and Level �.
• You can check the selected level through the water level indicator on the main unit.
Water Level �:
Recommended for floors made of wood (plywood, solid wood,
engineered wood, etc.) and low level of dust buildup.
Water cut off (dry mop):
Recommended for sticky or wet floors due to high
humidity during the rainy season.
• The maximum distance that the remote control signal can be received is �m,
and there may be restrictions on signal reception if there are obstacles nearby.
• The remote control does not work while charging the product.
➀ Remove the remote control cover.
➁ Insert the batteries as shown in
the picture.
➂ Close the remote control cover
by sliding it until it clicks.
How to Insert Batteries
Using the Remote Control
Note
Note
